How To Clean A Ionic Pro Air Purifier

background image

With very little effort, the Ionic Pro

Turbo

ionic air purifier delivers cleaner, fresher, healthier air

to your indoor environments. Keep your Ionic Pro

Turbo

ionic air purifier functioning properly by

cleaning the collection blades after every month of use as recommended. The internal ionizing wires

are an important part of the Ionic Pro

Turbo

ionic air purifying system and need to be cleaned at

the same time or whenever you hear excessive noise. (See

"TO CLEAN IONIZING WIRES" and "DEEP

CLEANING"sections.)

More frequent cleaning may be required if your Ionic Pro

Turbo

ionic air purifier is new or if you

place it in a different location. Exposing your Ionic Pro

Turbo

ionic air purifier to candle/oil lamp/

fireplace soot and smoke is not recommended and will require the collection blades to be cleaned

after every exposure. (See

"IMPORTANT WARNINGS".)

HELPFUL TIPS: Remember to clean your Ionic Pro

Turbo

ionic air purifier every month and

anytime the red CLEAN/FAULT light comes on or whenever you hear your unit begin to make

excessive noise.

To Clean the Collection Blades:

1. Turn off and unplug your Ionic Pro

Turbo

ionic air purifier.

2. Let the unit rest a minute before attempting

to remove the collection blades.

3. Pull upward on the release latch of the

collection blade unit and pull out from the

main door.

4. Remove the collection blade unit.

5. Do not touch the metal blades until after

discharging residual electricity by touching

blades to an electrical ground such as a

water pipe or metal faucet.

6. Wipe away the trapped particles collected on

the three blades with a slightly damp sponge

or cloth.

IMPORTANT: To avoid damaging your Ionic Pro

Turbo

ionic air purifier, make sure the blades

are completely dry and free of all moisture and that your Ionic Pro

Turbo

ionic air purifier is

turned off before re-insertion. If you used a slightly damp cloth to clean the blades, it is possible

the collection blades will be completely dry within two to three hours.

READ THIS: To avoid damage, please make sure that all surfaces and edges of the

collection blades are thoroughly dry before re-inserting them into your Ionic Pro

Turbo

ionic air purifier.

CLEANiNG & MAiNTENANCE

To Clean the Oxygen Plus™ filter:

1. Turn off and unplug your Ionic Pro

Turbo

ionic air purifier.

2. Open the main door and remove the collection blades, the

Oxygen Plus™ filter is located inside the main door.

3. Put the hose attachment of your vacuum near the Oxygen

Plus™ filter and make sure to clean without touching the

Oxygen Plus™ filter.

To Clean the Internal

Ionizing Wires:

There is an internal wire cleaner that cleans the internal

ionizing wires by sliding up and down to scrape off

particle residue.

1. Gently pull the lever up and down several times.

2. The internal ionizing wires need to be cleaned after

every two weeks of use.

CLEANiNG & MAiNTENANCE